VBrick dme Admin Manual page 122

Management SAP Fields Description
Transmit Enable
Group Name
Unit Number
Retransmit Time
Time To Live
Differentiated Services
IP Address
Port
Announce SAP Fields
Announce Enable
110
Check to enable transmit for management SAPs. Default =
.
Enabled
Optional. This parameter is included in the Management SAPs
used by VBDirectory. It is used for organizing Vbrick devices
into groups to simplify use of VBDirectory.
Optional. The appliance unit number (range 0–2147483647) is
used to identify each DME in a group.
Defines the Management SAP retransmit time.
For Unicast, the number of hops (between routers) for which an
IP packet is valid in the network. For multicast the distribution
scope of the SAP.
Differentiated Services Code Point
IP packets for packet classification purposes. DSCP replaces the
three bit
Type of Service
See
Differentiated Services
Defines the Destination IP Address for Management SAPs.
Defines the Destination Port for Management SAPs.
Description
Enables configuration of the announcement.
(DSCP) field in the header of
byte of the IP header.
on the Streaming topic.
© Vbrick Systems, Inc.