Logging; Enable Error And Access History Logging - VBrick dme Admin Manual

Logging

Enable Error and Access History Logging

The on the Monitor > Error Log page displays DME status messages as well as
Error Log
errors.
Access History
since the last reset.
The page specifies logging rotation and overwrite rules.
Logging
To specify logging rotation and overwrite rules:

1. Navigate to
Field
Roll Logging
Roll log
Remote Logging
Remote Server
Address
Remote Server Port Please provide the remote server port here; 514 is default.
DME Admin Guide
on the Monitor > Access History page shows files that have been accessed
> .
Logging Logging
Description
Check to enable the Error Log and/or the Access History rotation per
the defined settings. If this box is not selected, logging is still
Roll log
enabled but it will continue to accumulate into individual log files
rather than being rotated per the roll log settings defined below.
Logged entries are shown the respective
displays DME status messages as well as errors. The access log shows
files that have been accessed since the last DME reset.
Overwrite the logs every
first).
The DME can provide remote logging of system services. Use this
checkbox to enable and disable the service.
Please provide the remote server IP/FQDN address here.
Chapter 13
pages. The error log
Monitor
KB or every files (whichever comes
nnn nnn
167