VBrick dme Admin Manual page 51

Group Administration Task
Review Network Settings This task will show various Linux commands and result details of
Network
Monitoring
Tasks
Advanced Network
Health
TCP Network Health
UDP Network Health
Ping Test
Traceroute Test
Speed Test
DME Admin Guide
Description
your network settings.
Please review online Linux documentation for the associated/
displayed command for details on particulars of reported data.
Each report will display the DME Hostname and command to the
screen and wait for you to
This task will show various Linux commands and result details of
your network settings. Utilizing ifstat, this task will show
snapshots and a repeating display of RX/TX Pkts statistics across
interfaces. This task also provides the measures using netstat.
Please review online Linux documentation for the associated/
displayed command for details on particulars of reported data.
Each report will display the DME Hostname and command to the
screen and wait for you to
This task will show various Linux commands and result details of
your network settings. Specifically, netstat is used to review active
TCP connections with their state, and metrics per protocol.
Please review online Linux documentation for the associated/
displayed command for details on particulars of reported data.
Each report will display the DME Hostname and command to the
screen and wait for you to
This task will show various Linux commands and result details of
your network settings. Specifically, netstat is used to review active
UDP connections with their state, and metrics per protocol.
Please review online Linux documentation for the associated/
displayed command for details on particulars of reported data.
Each report will display the DME Hostname and command to the
screen and wait for you to
This task will allow entry of a Hostname or IP address to perform
a ping test. Five tests will be performed and displayed.
This is a useful feature to test your connection to your Rev
instance (default address for test) or other online Hostnames.
Like the ping test, this task will allow entry of a Hostname or IP
address to perform a traceroute. Each line will be displayed with a
max of 30 hops.
This is a useful feature to test and view the path to reach your Rev
instance (default address for test) or other online Hostnames.
This item will run an Internet speed test utilizing speedtest.net. In
order to run this test, the DME will need Internet access. It will
reach out and pull down a list of available servers, and connect to
a close server to retrieve a sample dataset. Nothing will be stored
on your DME.
This is only a snapshot representing conditions during the test.
Getting Started
.
Press Enter to continue
.
Press Enter to continue
.
Press Enter to continue
.
Press Enter to continue
39