Create Or Edit An Rtp Relay - VBrick dme Admin Manual

Field/Hyperlink
Relays
New Relay
Edit Relay
Delete Relay
C re a t e o r Ed i t a n R T P R e la y
To create or edit an RTP Relay:

1. Navigate to
2. Click
New Relay
existing relay. Complete the fields described below as required.
Field
Relay Name
Status
Source Settings
These settings describe the source of the stream to be relayed. It can be sourced internally
from the DME (127.0.0.1) or it can be fetched from elsewhere. You can also wait for it to be
announced. The dominant use case is to source the stream internally from the DME.
136
Description
Shows all defined relays.
Creates a new relay.
Edit the selected relay.
Delete the selected relay.
>
Output Configuration RTP Relay
to create a new relay or the relay name and then
Description
Enter a unique relay name.
Check to enable. Remember to click
.
Edit Relay
before you exit the page.
Apply
© Vbrick Systems, Inc.
to modify an