Saps For Unannounced Streams - VBrick dme Admin Manual

Announce SAP Fields
Send SAP for Internal IP
Send SAP for NAT'ed IP Send a SAP for the natted IP address configured on the System
IP Address
Port
Transmit Interval
Time to Live
Differentiated Services
Author
Copyright

SAPs for Unannounced Streams

To access the SAPs for Unannounced Streams fields:

1. Navigate to
Use this page to enable SAPs for streams which have been configured for input to the DME
using Unannounced Unicast/Multicast (In-8). This is not a common configuration and it is
recommended that an alternate input method be utilized if possible.
DME Admin Guide
Description
Destination IP address of the Multicast Announcement for
Stream Announcements. Most commonly for multicast, but can
be unicast for direct transmission to, for example, a VEMS
Mystro server.
Configuration > Network page.
Actual IP address of the SAP announcement.
Announcement Destination Port.
How often the Announcement is transmitted in seconds.
For unicast, the number of hops (between routers) for which an
IP packet is valid in the network. For multicast, the distribution
scope of the SAP.
Value that instructs (capable) routers on how to handle a packet.
These are generally quality of service items. This is typically set
to all zeros.
See
Differentiated Services
Optional author information
Optional copyright information
>
SAP Configuration SAPs for Unannounced Streams
SAP Configuration
on the Streaming topic.
.
111