VBrick dme Admin Manual page 52

Group Administration Task
System Services (Status &
Running
Services
Restart)
Tasks
Streaming Services
HTTP/Caching Services
Reboot Device
Rebooting
Tasks
Shutdown Device
Recent Shutdown History This task will display a recent history of shutdown activities, as
Sysuser Login Failures
Reset Tasks
Reset Sysuser Login
40
Description
This task will display system information and status and memory
use of several System Services. If appropriate, user will be
prompted to restart the service.
Do not restart services during an upgrade, or while there is heavy
server use. Restarting services may have an impact on streaming
delivered from the DME.
This task will display system information and status and memory
use of several DME (streaming, ingest) Services. If appropriate,
user will be prompted to restart the service.
Do not restart services during an upgrade, or while there is heavy
server use. Restarting services may have an impact on streaming
delivered from the DME.
This task will display a quick log review, system information and
status and memory use of system services related to the DME
Caching Engine and Web page Serving. If appropriate, user will
be prompted to restart the service.
Do not restart services during an upgrade, or while there is heavy
server use. Restarting services may have an impact on streaming
delivered from the DME.
This task will Reboots the device allowing the user to specify an
option disk check on reboot.
If the DME is shut down improperly, the disk may need to be
checked to verify and recover any bad sectors. Use this option to
do so. Depending on the size of your disks, this may take a great
deal of time.
Do not reboot during an upgrade, or while there is heavy server
use. Rebooting will have an impact on streaming delivered from
the DME.
A graceful shutdown and power off that will require human
intervention to power the device back on.
Do not shutdown during an upgrade, or while there is heavy
server use. Rebooting will have an impact on streaming delivered
from the DME.
well as any sleep entries (there should not be any of these).
Displays information related to the current login failures for the
Sysuser. The current lockout is set to 3. If you are locked out,
please wait 15 minutes before attempting logging again.
This will reset the login password to original settings and reset
any log in failure that may have occurred for the Sysuser.
© Vbrick Systems, Inc.