Activate Feature - VBrick dme Admin Manual

Field
Device
Username/Password SAN access rights may require use of a user name and password.
Device IP Address
Virtual Folder Name The name given to the SAN disk as a mapped folder. "iSCSI" is
Format Destination
Discovered Device
Status

Activate Feature

The DME is a licensed product from Vbrick. A license file, available from Vbrick Support,
will provide access to Vbrick DME functionality – both the DME in general, as well as
features. The
System Configuration
maintain and update licenses on the DME.
• If you purchased a hardware DME from Vbrick, it will come with the license already
installed.
• If you purchased a software Virtual Machine version of the DME, you will need to
download the ova and install it and contact Vbrick Support for the License.
• If you purchase a feature in the future, you will need to get your Currently Installed
License (from the System Configuration > Activate Feature page) and contact Vbrick
Support to augment the license.
DME Admin Guide
Description
Enables the DME for SAN use. Disabling will remove the SAN
device and restart the DME. Enabling the device will discover the
device and provision the disk using the folder name specified below.
Where the SAN is found on the network.
recommended and becomes the folder name in the default FTP path.
Be sure the name you choose is not already in use.
• Do Not Format – Default.
• Force Format – When used in conjunction with enabling the
device, this option will delete all content on the disk. If the disk
was previously provisioned, you may not want to format the disk
again.
Read-only. If the SAN is found the device identification will be
provided automatically.
Read-only. Displays the disk size, or "unknown" if no SAN is
discovered.
>
Activate Feature
System Configuration
page provides the ability to apply,
101