VBrick dme Admin Manual page 214

Playback Examples
VEMS Mystro (Live
Entered URL)
iOS
Stream to the DME with an RTMP Push
This topic explains how to configure an RMS-to-DME stream using an RTMP Push output.
This is an alternate improved interface (that requires DME 3.1.1 or higher).
To configure an RTMP Push to a DME:

1. Go to the
Session Properties
2. Click on the
3. Click on the
4. Configure the
Field
URL
Stream
Username
Password
202
vbrtsp://172.1.1.1/vbStream1S1
vbhttp://172.1.1.1/vbStream1T1.sdp
http://<dme_ip_address>/HLS/<stream_name>/playlist.m3u8
page and then click
icon, highlight
Live H.264 for Flash
button, scroll down to
Options
, name, and credentials as follows:
URL Stream
Description
DME IP address in this format:
User configurable stream name that will be shown on Monitor >
Multi Protocol Connections page and used in a Flash player.
DME user name from User Configuration > Stream Input Authentication
page.
DME user name from User Configuration > Stream Input Authentication
page.
and
Outputs Create
, and click .
Next
, and expand the pane.
Broadcast (RTMP)
rtmp://<DME_IP_Addr>:1935/live
.
© Vbrick Systems, Inc.