VBrick dme Admin Manual page 114

To activate a new license or feature on the DME:

1. Navigate to
Some optional DME features, for example the VC Gateway Configuration and Stream
Conversion must be "activated" before the functionality is available on the Configuration
Menu.
You will need:
• The MAC address of the DME machine.
• The serial number for future support.
• A license file from Vbrick Support that includes the feature.
The MAC Address of the DME machine is shown on the Activate Feature page (seen below);
the Serial Number and License File are available using the "License Activation" letter you
received with your order.
After you get the license file (as explained below) you will copy and paste the entire contents
of the file into the License Content text box.
Once activated, the system license will be shown on the
page.
To obtain a license file and activate a feature:

1. Navigate to
2. Contact Vbrick Support to obtain the license file needed for your DME and features
purchased. You may need to provide the license text from the Currently Installed License
text box for verification and modification.
3. Vbrick Support will supply the new license text (either as a .lic file, or as text within an
email).
4. Open the file in Notepad and copy the entire contents and paste it into the
text box.
Content
5. Enter the serial number from the sticker in the
6. Click
Activate
102
>
System Configuration Activate Feature.
>
System Configuration Activate Feature
to close the application and display the login page.
System Configuration
page.
text box.
Serial Number
© Vbrick Systems, Inc.
>
General
License