Rev Interface - VBrick dme Admin Manual

7. Login and repeat these steps for each additional licensed feature.
Register the DME

Rev Interface

To configure the DME to interface with Rev:

1. Navigate to
To stream and store content from Vbrick Rev, you must first configure your DME to
integrate with Rev. You must complete the fields below and click
able to add this DME as a device in Vbrick Rev.
Field
Rev Interface
Running
Rev Enabled
Rev Server URL
DME Admin Guide
>
System Configuration Rev Interface.
Description
Indicates whether or not the DME service that communicates with
Rev is running or not. This service is responsible for communicating
with Rev and must be running for communication between the DME
and Rev to occur (videos can still be accessed on the DME by Rev).
If the service is not running and set to false, toggle and save the
checkbox to restart the service. If you experience further
Enabled
trouble with the service restarting, contact Vbrick Support Services.
Select to enable integration with Rev with your DME. This allows
your DME to be linked with Rev.
The URL of your Rev server.
System Configuration
before you will be
Apply
Rev
103