Readonly Username And Password; Stream Input Authentication - VBrick dme Admin Manual

R e a d o n ly Us e rn a m e a n d P a s s w o rd
To access the Readonly Password field:

1. Navigate to
section.
Use this page section to change the
account user name and password (default for both =
only access to the DME server.
When logged in as a Readonly user, the user may only browse the DME interface. No
modifications may be made.
Caution: Be aware that you must know the current Administrator
User Name and Password to change the Readonly password.
Further, while you may change the password for the Readonly
account, the User Name will always be the default, "readonly",
and may not be changed.
Field
Current Administrator
Current Administrator
Password
Readonly User New
Password
Re-enter New Password Re-enter new password and be sure to click
Username and Password

Stream Input Authentication

To access the Stream Input Authentication fields:

1. Navigate to
Use this page to configure a "broadcast" password that will allow you to publish streams to
this server. This password is needed when sending a stream via auto unicast to a DME using
either In-2 or In-3 or when sending an RTMP stream from a live encoder to the DME In-1.
146
>
User Configuration Username and Password
Readonly
Description
Enter current Administrator user name.
Enter current Administrator password.
Enter new Readonly password.
.
Password
>
User Configuration Stream Input Authentication
>
Readonly User Management
user account password if desired. The Readonly
) is used specifically for read
readonly
.
Change Readonly
© Vbrick Systems, Inc.