Hls; Hds - VBrick dme Admin Manual

Table of Contents

Advertisement

server uses Port 80 by default but this can be changed on the System Configuration > Port
Settings page. You can play the stream in an appropriate player (see the table below) for
example in a QuickTime, Flash, or HLS (iPhone) respectively using a URL similar to these:
http://<ip_address>/filename.wmv
http://<ip_address>/subfolder/filename.flv

HLS

For HLS, use the following options:
To play a live non-adaptive HLS stream when no master playlist is selected:
http://<dme_ip_address>/HLS/<stream_name>/playlist.m3u8
To play a stored non-adaptive HLS stream when no master playlist has been created:
http://<dme_ip_address>/<stream_name>/playlist.m3u8
To play a live or stored adaptive HLS stream and have the player specifically select one
stream (normally for test purposes):
http://<dme_ip_address>/<master_playlist_name>/<stream_name>/playlist.m3u8
To play a live or stored adaptive HLS stream and (typically) have the stream selected by
automatic negotiation between the player and the server:
http://<dme_ip_address>/<master_playlist_name>/playlist.m3u8

HDS

For live HDS, use the following options for a configured live stream.
To play a non-adaptive HDS stream when no master playlist is selected:
http://<dme_ip_address>/HDS/<stream_name>/manifest.f4m
To play an adaptive HDS stream and (typically) have the specific stream selected by
automatic negotiation between the player and the server:
http://<dme_ip_address>/HDS/<master_playlist_name>/manifest.f4m
For stored HDS content the content must be placed in the hdsvod directory under ftproot.
Use the following URLs for playback:
To play a non-adaptive HDS stream when no master playlist is selected:
http://<dme_ip_address>/hdsvod/<filename>.f4m
To play a stored adaptive HDS stream and (typically) have the specific stream selected by
automatic negotiation between the player and the server:
http://<dme_ip_address>/hdsvod/<filename>.f4m
Table 1. Outputs and Associated Players
DME Output
RTP
RTMP
WMV
HLS
HDS
DME Admin Guide
Supported Players
Vbrick StreamPlayer, QuickTime
Flash players (e.g. Adobe, JW, VLC, etc.)
Windows Media Player, Vbrick StreamPlayer
iOS devices (iPhone, iPad, iPod)
Flash players via HTTP
Configure a DME Stream
65

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents