VBrick dme Admin Manual page 178

Field/Link
Show/Hide Last Set Top
Box Report
Go To Rev
Communications Log
Refresh STB List
Filter STB List
IP-Address
Host-Name
Model
S/W-Version
Last-Report
Status
Note: Clicking Show/Hide Last Set Top Box Rev Report will show
the formatted information that the DME sends to Rev. This is to be
used in conjunction with Vbrick Customer Support if necessary as
requested.
Clicking Go to Rev Communications Log links to the page where
the DME to Rev interface logs may be viewed. The full logs are also
available within the DME Logs directory. This is also to be used in
conjunction with Vbrick Customer Support if necessary as requested.
166
Description
Toggle that will display/hide the most recent STB report.
Displays a list of the most recent Rev interface communications
logs. You may also manually generate new logs from this form.
Manually refresh the list of discovered STBs.
Filters the list of found STBs.
IP address of the STB.
Host name of the STB as identified with the MF-STB SAP
message.
Software version of the STB. Please use this to identify MF-
STBs that need updating.
Software version of the STB
The date and time a report was obtained from the STB. This is a
periodic update, so this value will change.
The status of the STB. Possible states are:
• Ok: The STB was accessed successfully by the DME
• Invalid Credentials: The DME could not log-in to the STB
• WebServiceDisabled: Remote access to the STB is disabled
• Error: The operation failed for an unknown reason
© Vbrick Systems, Inc.