VBrick dme Admin Manual page 173

Field
Line Identity
IP, Host, or Domain
Total Number Lines
SIP Call RTSP Port
Number Incoming Lines Determines the number of available lines shown on the Incoming
Number Outgoing Lines Determines the number of available lines shown on the Outgoing
Activate Incoming Line Automatically activate newly created incoming lines.
Call Outgoing Line
Video Resolution
P-Mode
DME Admin Guide
Description
IP address, host name, or domain of the DME.
Read-only. The total number of incoming and outgoing lines
available depends on your license. See Configure a VC Gateway
Stream for line availability.
The default value is 554. This field value should match the value
in the field under System Configuration > Ports.
RTSP Server Port
If the two fields do not match, the SIP Gateway will not function
correctly.
Lines page. Total cannot exceed license.
Lines pages. Total cannot exceed license.
Automatically call newly created outgoing lines.
Select from dropdown list. Sets the video encoding resolution (the
width and height respectively) of the compressed video stream.
Packetization mode defines the packetization rule for the
incoming/outgoing stream. Default = standard. Do not change
except as directed.
VC Gateway Configuration
161