Flash Multicast - VBrick dme Admin Manual

Field
Application
Emulate (o)
swf URL (o)
Page URL (o)
User Name
Password
Enable
Status
DME Model
7530
7550
7570

Flash Multicast

To access the Flash Multicast fields:

1. Navigate to
This page will allow you to convert a stream to Adobe's Flash Multicast. This protocol can be
played by existing, fielded Flash players removing the need to distribute players for multicast
playback. Vbrick continues to see the necessity and need for multicast within the enterprise
environment and provides Flash Multicast as an alternative for this support.
The most common use case here is for organizations to unicast a stream from a central
location to one or more remote DMEs, where that DME then multicasts to local viewers.
122
Description
The application is defined by the destination. For example, when
sending to another DME, the string should be
When sending to a CDN, the string will need to be extracted from
vod.
the publishing URL the CDN gives to you.
An example publish to URL from a CDN such as Edgecast is:
rtmp://fso.dca.A3CD.edgecastcdn.net/20A3CD/HLSTest/
vBrick?xZ7q0oCEoQ6hvqp5
Where:
• Target Name =
• Destination =
fso.dca.A3CD.edgecastcdn.net
• Application =
20A3CD/HLSTest
Optional May be required for some destination devices.
Optional May be required for some destination devices.
Optional May be required for some destination devices.
Required if client-side authentication is required by the destination
server
Required if client-side authentication is required on the destination
server
Use dropdown to enable or disable the stream. All streams are disabled
by default.
Read only: Disabled | Streaming | Waiting for Stream (Input source
<stream_name> not yet available.)
Number of Configurable Output
Streams
25
35
60
>
Output Configuration Flash Multicast
vBrick?xZ7q0oCEoQ6hvqp5
.
or
live, vbApp, vbrick,
© Vbrick Systems, Inc.