Defaults - VBrick dme Admin Manual

You can initiate a call by enabling
button on the Outgoing Lines page. Either method will auto connect with the configured
video conferencing endpoint (i.e. the
Field
Destination Identity
Proxy Address
Auto Call Line
Create or Edit a VC Gateway Incoming Line

Defaults

To access the VC Gateway Defaults fields:

1. Navigate to
Use this page to set SIP defaults for many of the parameters on the incoming and outgoing
line detail pages.
Note that any changes you make on this page do not affect existing lines. Changes made on this
page will apply only to "new" incoming or outgoing lines.
160
Call Line
Destination Identity
Description
The name and IP address of the videoconferencing destination
endpoint in the format shown. This is the identifier the DME will
use to call into the remote videoconferencing unit:
sip:name@<destination_ip_address> (or <host name>).
Optional field to list the IP address of a proxy server if one is
required.
Automatically initiates a call when you check the box and click
.
Apply
VC Gateway Configuration
and clicking or
Apply OK
).
> .
Defaults
or by using the
Call
or
OK
© Vbrick Systems, Inc.