User Configuration; Username And Password - VBrick dme Admin Manual

User Configuration

Username and Password

To access the Username and Password fields:

1. Navigate to
Management
Use this page section to change the user name and password (default for both =
the DME server (and the FTP server). There is only one user name and password on the
system and this access is not the same as ReadOnly access. If you change the user name and
password, be sure to record the new name and password. If you lose the user name or
password you will be unable to login to the server.
Caution: Be aware that when you change the user name and password
for the server you are changing the FTP user name and password as
well.
Field
Current User Name
Current Password
New User Name
New Password
Re-enter New Password Re-enter new password and be sure to click
Readonly Username and Password
DME Admin Guide
>
User Configuration Username and Password
section.
Description
Enter current user name.
Enter current password.
Enter new administrator user name.
Enter new administrator password.
Chapter 10
>
Administration User
) for
admin
Change Password
.
145