Reset The System - VBrick dme Admin Manual

You may also see
are on.
Apply
Revert
Default
System Reset
R e s e t t h e Sy s t e m
A system reset resets (i.e. reboots) the appliance. It does not change, save, or reset any
configuration parameters.
To reset the DME:

1. Navigate to Maintenance > System Maintenance.
2. Click the
Reset
Note: Some changes to the configuration will initiate an automatic reset.
When this happens, wait approximately 60 seconds, then refresh the page
and log back in with your user name and password.
System Reset
20
, , and other buttons depending on what page you
Refresh Reset Counters
Applies the changes made on the screen to the appliance. Each
configuration page has an
exit the page; otherwise your changes will be lost.
Aborts all changes made on the screen and returns to the values that were
present prior to any changes. The
were present prior to the last "apply."
Returns to the default settings for all parameters on the page. You must still
click for these default settings to take effect.
Apply
button under the
System Reset
button. You must click
Apply
button restores the values that
Revert
label.
before you
Apply
© Vbrick Systems, Inc.