Transport Stream In; Mpg2Ts Streams - VBrick dme Admin Manual

Field/Icon
Log this playlist's
activity
Send this playlist to a
broadcast server

Transport Stream In

To access the Transport Stream In fields:

1. Navigate to
Use this page to configure streams pushed via unicast or multicast to the Multi-Protocol server using
transport stream. The number of streams supported depends on the model of the DME.

MPG2TS Streams

The DME can accept a live unicast or multicast MPEG2TS (with an MP2 or MP4 H264
payload) and deliver it from the DME as unicast or multicast. (A live MPEG2TS is typically
pushed from a a VB6000/7000/9000 Vbrick MPEG-2/H.264 encoder or another DME.)
DME Admin Guide
Description
Log this playlist's activity in the Access History log.
• Hostname or IP Address – enter server host name or IP address
of broadcast server.
• User Name – enter valid administrator name on broadcast
server.
• Password – enter valid administrator password on broadcast
server.
>
Input Configuration Transport Stream In
Input Stream Configuration
.
117