Ssl Certificates - VBrick dme Admin Manual

Field/Button
Restore Configuration • Restore from a file – This allows you to restore a previously

SSL Certificates

To access the SSL Certificates fields:

1. Navigate to
When using SSL, a server certificate is required for secure communications. DME Supports
two types of SSL security certificates:
Organizational security requirements determine which to use. Both are supported by the
DME. Notice that the
In the case of self-signed certificates, select the
button and the certificate is simply generated and installed by the DME.
DME Admin Guide
Description
saved configuration settings file. This operation will not restore
the FTP user name and password. After a "restore
configuration" you will need to manually change this (if desired)
using the Username and Password page. Further, all
NETWORK and CERTIFICATE settings will remain as
previously set before the restore – please review and adjust
accordingly. After any restore, it is good practice to review and
possibly change your Username and Passwords, configuration
settings, and streams.
• Restore from a snapshot point – Restores from the snapshot
point created with a "Save Configuration." Note: This option
only works if there is a previously saved snapshot created with a
"Save Configuration." Also, similarly to Restoring from a file, all
NETWORK and CERTIFICATE settings will remain as
previously set before the restore – please review and adjust
accordingly. After any restore, it is good practice to review and
possibly change your Username and Passwords, configuration
settings, and streams.
>
System Configuration SSL Certificate.
Self-Signed
Currently Installed Certificates
and
Authority Generated
are displayed at the top of the form.
Generate and Install a Self-Signed CERT
System Configuration
(e.g. Verisign).
97