Configure An Rtp Stream For The Dme; Configure A Transport Stream For The Dme - VBrick dme Admin Manual

Desired Result
Solution

Configure an RTP Stream for the DME

Desired Result
Solution
Desired Result
Solution
Desired Result
Solution
Desired Result
Solution

Configure a Transport Stream for the DME

Desired Result
Solution
Desired Result
Solution
Desired Result
Solution
206
Use the RTMP stream to generate unicast flash streams, and convert it to
RTP to be able to multicast it as well.
• Unicast Flash:
n-5 to Out-3
• Multicast RTP: I
n-5 to Out-10 to Out-7
Send announced and unannounced RTP streams from an encoder to the
DME and give it a name in the DME.
• Unannounced:
In-8
• Announced:
In-5 to Out-10 to Out-7
Use the received RTP stream to create a multicast to a multicast address to
play in an enterprise stream player.
• Unannounced: I
n-8 to Out-7
• Announced:
In-2 to Out-10 to Out-7 (preferred) or In-3 to Out-7
Use the received RTP stream to create a flash stream to play in a Flash
player via unicast
• Unannounced:
In-8 to In-6 to Out-1
• Announced
In-2 to Out-1 (Preferred) or In-3 to In-6 to Out-1
Use the created Flash stream to generate a HLS stream so that the stream
can be played on an iPad via unicast.
• Unannounced:
In-8 to In-6 to Out-6
• Announced:
In-2 to Out-6 (Preferred) or In-3 to In-6 to Out-6
Send an unannounced Transport stream from an encoder with KLV data to
DME and give it a name.
In-4
Use the name TS stream to send out to 3 other TS destination via RTSP.
In-4 to Out-2
Use the same TS stream to multicast to a single multicast address.
or to
In-4 to Out-5 ( T S ) In-4
to
Out-10 Out-7 (RTP)
© Vbrick Systems, Inc.