VBrick dme Admin Manual page 167

Field
Maximum Call Time
Video Resolution
P-Mode
I-Frame Interval
Audio Bit Rate
Activate Line
DME Admin Guide
Description
Maximum duration for any call after which the system will
automatically hang up. Default = 120 minutes.
Select from dropdown list. Sets the desired video encoding
resolution (the width and height respectively) of the compressed
video stream. Note that the actual resolution is determined by
negotiation between endpoints.
• 1920x1088 @ 60fps at 4096kbps
• 1920x1088 @ 30fps at 2048kbps
• 1280x720 @ 60fps at 2048kbps
• 1280x720 @ 30fps at 1024kbps
• 960x544 @ 30fps at 1024kbps
• 704x480 @ 30fps at 512kbps
• 704x576 @ 25fps at 512kbps
• 352x240 @ 30fps at 256kbps
• 352x288 @ 25fps at 256kbps
Packetization mode defines the packetization rule for the
incoming/outgoing stream. Default = standard. Do not change
except as directed.
Video conferencing systems typically do not send IDR frames
although they are required for most players. This is the frequency
at which IDR (Intra Dynamic Refresh) frames are inserted.
Default = 5 seconds. Valid range is 1 - 8 seconds.
Select from dropdown: 16K, 32K, 64K.
The line cannot be used for a videoconference until it has been
activated. Default = disabled.
VC Gateway Configuration
155