Relay Status; Access History - VBrick dme Admin Manual

Field
Connected Users

Relay Status

To access the Relay Status fields:

1. Navigate to
This page shows the status of all defined relays. Click on the column header to sort the
entries up or down
Field
Display entries
Page Refresh Interval From the dropdown, select the page refresh interval.
Connected Relays

Access History

To access Access History information:

1. Navigate to
172
Description
The DME displays the following information for each connected
user. Click on the header field to sort ascending or descending.
• Type – a video icon indicates a stream is present.
• IP Address – user IP address.
• Bit Rate – stream bit rate in Kbps.
• Bytes Sent – total bytes sent.
• % Packet Loss – percentage packet loss.
• Time Connected – total time connected.
• Connected To – target IP address.
> .
Monitor Relay Status
Description
From the dropdown, select the number of entries you wish to
display.
The DME displays the following information for each connected
relay. Click on the header field to sort ascending or descending.
• Relay Name – relay name.
• Source – source IP address.
• Destination – destination IP address.
• Bit Rate – stream bit rate in Kbps.
• Bytes Relayed – total bytes relayed.
>
Monitor Access History
.
© Vbrick Systems, Inc.