Configure Vboss For The Dme; Configure Rich Media Desktop (Rmd) For The Dme - VBrick dme Admin Manual

Playback Examples
VEMS Mystro
(Live Entered URL)

Configure VBOSS for the DME

To send a stream from a Vbrick Encoder > VBOSS > DME > Flash client: (Example 1)

1. Configure an RTMP Transmit from encoder to VBOSS URL.
2. In the DME, configure
3. Distribute as Flash:
To send a stream from Vbrick Encoder > DME > VBOSS: (Example 2)

1. Configure an RTP Auto Unicast (
2. Configure
RTMP Push (

Configure Rich Media Desktop (RMD) for the DME

Requires RMD 1.1 or higher.
You can use RMD to send a Flash (RTMP) stream to the DME. To configure a a Flash
stream, launch RMD, go to Broadcast > Broadcast Settings, and configure the following page
with the values shown below. (As shown in the example, "live" is the default application name
for the DME.)
You will also need to click
DME's Stream Input Authentication user (default = broadcast | broadcast). When done, go
to Broadcast > Start/Stop Broadcasting to start streaming to the DME.
You can then use any of the DME output methods to redistribute the stream. See Configure
a DME Stream for details.
198
RTMP
rtmp://<dme_ipaddress>/live/<stream_name>
RTP
vbrtsp://<dme_ipaddress>/filename.sdp
TS
vbricksys://<multicast_ipaddress>:port
HLS
http://<dme_ipaddress>/HLS/ <stream_name>/
playlist.m3u8
HLS
http://<dme_ipaddress>/HDS/ <master_playlist>.f4m/
RTP
http://<dme_ipaddress>/<multicast_sdp_file.sdp
Multicast
to (to pull the VBOSS URL).
E L
vbrtsp://<dme_ipaddress>/live/<stream_name>
) from encoder to DME.
In-2
Out-9) to the VBOSS publishing point.
and enter the User Name and Password for the
Set Credentials
© Vbrick Systems, Inc.