System Configuration; Network; Fully Qualified Domain Name (Fqdn) - VBrick dme Admin Manual

System Configuration

Network

To access the Network fields:

1. Navigate to

Fully Qualified Domain Name (FQDN)

To access the Fully Qualified Domain Name (FQDN) field:

1. Navigate to
section.
Use this field to configure your
yourdmehostname.yourcompanydomainn.com).
Caution: Please make sure to enter your FQDN in all lowercase letters.
This name will be shown in the banner graphic at the top right of all the DME Admin UI
configuration pages.
Currently, the FQDN defaults to DME<MAC ADDRESS>.While you can continue to use
this, it is recommended that you change it. Please contact your network administrator to
make sure that this FQDN is registered within your DNS servers for easy access. Also
remember that this FQDN will identify the appliance to various network applications --
including DHCS and the
DME Admin Guide
>
System Configuration
>
System Configuration
Fully Qualified Domain Name
application.
VBDirectory
.
Network
>
Network Fully Qualified Domain Name (FQDN)
(e.g.,
Chapter 5
67