Provision A New Disk - VBrick dme Admin Manual

Table of Contents

Advertisement

Field
Page Refresh Interval
Existing Disks
New Disks Found
Provision
Tip: When extending space with Virtual Disks, Vbrick recommends creating
additional virtual disks and provisioning them using the Maintenance > Disk
Status page. While VM hosts allow the expansion of already provisioned virtual
disks, they do not automatically expand the OS disk partitions contained within.
Meaning, the DME does not detect that expansion of the partition on the
virtual disk so the added space will not be detected. Alternatively, iSCSI disks
can also be added to VMs – please see SAN/iSCSI Setup.

Provision a New Disk

To provision new disks, first turn off you DME (either physically or shutdown a VM). Add
the disk accordingly. After restarting your DME you should see the new disk in the
table with a button to "
Found
system) and adding the new disk storage to the DME common data storage location. In other
words, this extends the existing files system over the new disk and the new disk may not be
removed once provisioned.
It is also important to note that for VM installs Vbrick only supports the expansion of the
disk space by creating additional virtual disks and provisioning them using the
page. While VM hosts may allow the expansion of virtual disks, they do not
Disk Status
automatically expand the disk partitions within the VM OS. Meaning, the DME does not
detect that expansion of the partition on the virtual disk. The solution in this case is to add
an additional new virtual disk.
DME Admin Guide
Description
• Never – Never refresh page.
• 30 seconds – Refresh page every 30 seconds.
• Disk Name – Disk name.
• Size – Configured size in KB.
• Status – Displays either "Built-in Disk" or "Provisioning" if a
provisioning is in progress.
• Disk Name – Disk name.
• Size – Configured size in KB.
Shown only when a new disk has been found. Click the named
button to start the provisioning process for that disk. Note that this
step is irreversible. See Provision a New Disk for more information.
". Provisioning is the act of formatting (for xfs file
Provision
Maintenance
New Disks
>
Maintenance
179

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents