Create Or Edit A Vc Gateway Outgoing Line - VBrick dme Admin Manual

Field
Page Refresh Interval Select a refresh interval from the dropdown or
Line Name
State
Edit
Delete
Line
Record
Default
To place an outgoing call to a videoconferencing system:

1. Make sure the Outgoing Line Details (including the
correctly for the selected
2. Click the
Call
3. Verify the State is "
4. Verify you have audio and video on the videoconferencing monitor or your desktop.
5. If a Live Entered URL is configured in VEMS Mystro, verify the stream is present.
C re a t e o r Ed i t a VC Ga t e w a y O u t g o i n g Li n e
To create or edit a VC Gateway Outgoing Line:

1. Navigate to
2. Click to create a new line or
New
The
Outgoing Line Details
shown on this page are identical to those on the Incoming Line Details page except for the three fields
explained below. In most cases you can use the values specified on the Defaults page. Click on
the button to set or reset to the defaults.
Default
DME Admin Guide
Description
recommended).
User-configured line name. Default =
Displays various descriptive messages indicating the current "state"
of the line. The first connected line will display as
additional connected lines will display as
. Click to create a new line or to edit an existing line.
Edit | New
Click and confirm to delete a line.
. Click Call to initiate a videoconference with the
Call | Hang Up
configured endpoint or Hang Up to end the call.
Click to record the VC Gateway stream on the configured VEMS
Mystro server.
Use with care. This button will delete all lines in the table.
.
Line Name
button for the selected
" on the Outgoing Lines page.
connected
VC Gateway Configuration
Edit
page shows parameter details for outgoing lines. The parameters
OutgoingLine<n>
bridged
Destination Identity
on the Outgoing Lines page.
Line Name
> .
Outgoing Lines
to edit an existing line.
VC Gateway Configuration
(not
Never
;
connected
.
) are configured
159