The Apply, Revert, And Default Buttons - VBrick dme Admin Manual

The registration splash page is automatically displayed after accepting the EULA. You will
need to register your DME with Vbrick before you can run the application.
The following items will be required to register a DME:
1. The MAC address of the DME machine
2. The serial number(s) for future support
3. A license file.
The MAC address is pre-filled on the registration page (see above); the serial number(s) are
available using the "License Activation" letter you received with your order. And a license file
is obtained through Vbrick Support Services.
To obtain a license file and register your DME:

1. Contact Vbrick Support to obtain the license files needed for the type of DME and
features purchased.
2. Click on the green hyperlink for information on how to contact support.
3. When prompted, browse to a folder where you will save the .lic license file (once received
from support).
4. Open the .lic file in Notepad and copy the entire contents. Then go back to the
Registration Page
5. Enter the Serial Number(s) from the sticker in the serial number text box on the
"License Activation" letter you received with your order.
6. Click
Finish Registration
7. A similar process is followed to license and activate new features on a previously existing
and license DME.
Activate Feature
T h e Ap p ly , R e v e rt , a n d D e f a u lt B u t t o n s
Depending on screen resolution, it may be necessary to scroll down the page to see additional
information and fields. The
the bottom of the page when appropriate.
DME Admin Guide
and paste the contents into the license text box.
to complete your registration.
, and
Apply Revert Default
buttons however, are always shown at
Getting Started
DME
19