Create A Custom Audio Chime Or Welcome Message - VBrick dme Admin Manual

Field
I-Frame Interval
Audio Bit Rate
Log Level
Max Number of Log
Files
Max Log File Size
Never Hang Up
Incoming Maximum
Call Time
Outgoing Maximum
Call Time
Should Register
Audio Welcome Prompt An audio message ("Welcome to Vbrick DME") or chime is
Automatic Record to
Rev
Automatic Record to
VEMS
VEMS Mystro Address
VEMS Mystro User
VEMS Mystro Password Set default VEMS Mystro password.
C re a t e a C u s t o m Au d i o C h i m e o r We lc o m e M e s s a g e
A chime sound and a brief welcome message are played when placing or receiving calls to or
from a video conferencing endpoint. You can replace these default audio files by uploading
your own recordings that are created in .raw format only.
The following steps explain how to create a .raw file on a Windows machine that has an audio
recording device.
162
Description
Video conferencing systems do not send IDR frames although
they are typically required for most stream players. This is the
frequency at which IDR (Intra Dynamic Refresh) frames are
inserted. Default = 5 seconds.
Select from dropdown: 16K, 32K, 64K.
• Debug – Provides verbose information (default).
• Info – Provides limited information.
The maximum number of files allotted for logs.
The maximum file size for log files.
Do not hang up. If you leave the call connected it will
automatically hang up after 720 minutes. Default = disabled.
Maximum duration for any call after which the system will
automatically hang up. Default = 120 minutes.
Maximum duration for any call after which the system will
automatically hang up. Default = 120 minutes.
The session will be registered with a SIP Registration server if
present. Default = Enabled.
played when placing or receiving calls to or from an endpoint.
Select the type of welcome prompt preferred. To create a custom
prompt, select
User Configured
Chime or Welcome Message for details.
Automatically record calls on DME and upload to Rev.
Set auto-record on VEMS Mystro.
VEMS Mystro 6.x only. Set default VEMS Mystro IP address or
host name for recorded files. If SSL is configured on the VEMS
Mystro server, you must use a host name in this URL.
Set default VEMS Mystro user name.
. See Create a Custom Audio
© Vbrick Systems, Inc.