VBrick dme Admin Manual page 165

Tip: As a best practice when using the VC Gateway for incoming audio-only
calls, define one or more lines for audio-only usage. To subsequently use
those lines for incoming audio/video calls you must restart the Streaming
Server Service on the System Maintenance page.
Field
Line Name
Page Refresh Interval Select a refresh interval from the dropdown or
State
Edit
Delete
Activate
Line
Record
Default
To accept an incoming call from a videoconferencing system:

1. Make sure the Incoming Line Details (including the
correctly for the selected
2. The VC Gateway listens for incoming calls. When the
incoming call is connected to the VC Gateway.
3. Verify the State is "
4. Verify you have audio and video on the videoconferencing monitor or your desktop.
5. If a Live Entered URL is configured in VEMS Mystro, verify the stream is present.
DME Admin Guide
Description
The SIP Line name is used as Stream name elsewhere in the system
recommended).
Displays various descriptive messages indicating the current "state"
of the line. The first connected line will display as
additional connected lines will display as
. Click to create a new line or to edit an existing line.
Edit | New
Click and confirm to delete a line.
. Click and confirm to activate an existing line. A
Activate | Deactivate
call cannot be connected until the line is activated.
. Click on Hang Up to end the currently connected call.
Hang Up
. Click to record the VC Gateway stream on the
Record | Stop Record
configured VEMS Mystro server. The recording automatically
terminates when the line disconnects.
Use with care. This button will delete all lines in the table.
.
Line Name
" on the Incoming Lines page.
connected
VC Gateway Configuration
(not
Never
connected
.
bridged
) are configured
Line Identity
button is displayed, an
Hang Up
;
153