Hcit Controller Board Assembly Removal - Lexmark X746de Service Manual

HCIT controller board assembly removal

Remove the HCIT right cover. See
1.
2. Disconnect the seven connectors (A) from the HCIT controller board.
Remove the ground screw (B) from the HCIT controller board.
3.
4. Remove the two screws (C) securing the HCIT controller board to the card mount option.
5. Remove the HCIT controller board.
"HCIT right cover removal" on page
A
B
4-268.
C
Repair information
7526
Previous
Next
Go Back
4-271