Sensor (standard bin exit) actuator removal
1. Release the hooks (A) securing the sensor (standard bin exit) actuator to the assembly.
2. Remove the sensor (standard bin exit) actuator.
Sensor (toner density) removal
1. Remove the sensor shield assembly. See
2. Remove the two screws (A) securing the sensor (toner density) to the machine.
3. Remove the sensor (toner density).
4. Disconnect the connection (B) to the sensor (toner density).
"Sensor shield assembly removal" on page
7462
4-42.
Repair information
4-43
Previous
Next
Go Back