Ppp Profile/Ppp; Ppp/Vj Compression; Ppp/Max Config; Ppp/Max Timer - ADTRAN Express L128FP User Manual

Chapter 3. Terminal Menu Operation and Structure
»» PPP Profile/PPP
The Express L128FP supports the IETF standards for the Point-to-
Point Protocol. The PPP state machine running in the Express L128FP
can be fine-tuned to support many applications that can be employed.
The configurable items under this menu can be changed from their de-
fault values for special cases.

PPP/VJ Compression

Write security: 3; Read security: 5
When this item is set to On, the Express L128FP will perform TCP/IP
header compression known as Van Jacobson compression to the PPP
peer. Normally, this is not necessary over ISDN connections and can
be set to Off (def) to disable it.

PPP/Max Config

Write security: 3; Read security: 5
This value is the number of unanswered configuration-requests that
should be transmitted before giving up on a call. The possible values
are 5, 10 (def), 15 and 20.

PPP/Max Timer

Write security: 3; Read security: 5
This value is the number of seconds to wait between unanswered con-
figuration-requests. The possible values are 1 sec, 2 secs (def), 3 secs, 5
secs and 10 secs.

PPP/Max Failure

Write security: 3; Read security: 5
Due to the nature of PPP, configuration options may not be agreed
upon between two PPP peers. This value is the number of configura-
tion-naks that should occur before an option is configuration-rejected.
This allows a connection to succeed that might otherwise fail. The pos-
sible values are 5 (def), 10, 15 and 20.
3-48 Express L128FP User Manual 61202070L4-20