Protection Adaptive - ABB SACE Tmax XT5 Operation And Maintenance Manual

7 - Protection Adaptive

Dual Set The function enables two different protection configurations to be made, one as an alternative to the other,
67 | © 2019 ABB | 1SDH002039A1002 - ECN000093027 - Rev. A
The Adaptive Protection package is available by default for Ekip Hi-Touch, Ekip M Touch and Ekip G Hi-Touch
and configurable in the remaining models as additional SW package.
The protection is described below:
by means of a set change with programmable events.
The function can be activated in the Settings-Dual Set menu (page 33)
Parameter Description
Enable Activates/deactivates the function
Defines the sets of main and secondary protections (which activate in
Default Set
the presence of the programmed event)
The event that determines set change (from default to secondary) can be programmed in the Advanced -
Functions menu, see the paragraph Programmable Functions and Commands (page 76).
ABB | SACE Tmax XT
Default
OFF
Set A
Protections | 7 - Protection Adaptive