3 - Ekip Supply
Electrical characteristics
Connections The module must be assembled in the first slot of Ekip Cartridge.
131 | © 2019 ABB | 1SDH002039A1002 - ECN000093027 - Rev. A
Ekip Supply is an accessory supply module. It is available in two models, depending on the incoming voltage
to be provided.
It performs three functions:
• supplies auxiliary power to Ekip Touch
• allows the modules installed inside Ekip Cartridge to be connected to Ekip Touch
• acts as a bridge for the Local Bus between Ekip Touch and the external electronic accessories (e.g. Ekip
Signalling 10K and Ekip Multimeter)
The module has a Power led to signal the presence of incoming power supply:
• off: no supply
• on (steady): supply present
Model
Power supply voltages
Frequency
Maximum power consumption without modules
Maximum power consumption with modules
Maximum inrush current
(1)
Ekip Touch with just Ekip Supply
(2)
Ekip Touch with three modules connected with Ekip Cartridge
For references about the connection and terminals, please consult document 1SDM000005A1001; use AWG
22-16 cables with 1.4 mm maximum outer diameter for the external cabling.
To connect the module to Ekip Cartridge, please consult document 1SDH002009A1503.
Ekip Supply
24-48VDC
21,5 ÷ 53 VDC
--
3 W
(1)
10 W
(2)
2 A for 20 ms
ABB | SACE Tmax XT
Ekip Supply
110-240 VAC/DC
105 ÷ 265 VAC/DC
45 ÷ 66Hz
3 VA/W
10 VA/W
2 A for 20 ms
External accessories | 3 - Ekip Supply