ABB SACE Tmax XT5 Operation And Maintenance Manual page 185

Remote information Additional information can be accessed via the service connector (via Ekip Connect) or via a system bus
183 | © 2019 ABB | 1SDH002039A1002 - ECN000093027 - Rev. A
communication:
Parameter
HW and Boot version
Flash CRC status and result
Ekip Link status
SNTP Server Error
SNTP Server Synchronization
IEEE 1558 status
Description
general module information
Information about the correctness of the SW in the module
Signals Ethernet cable connection errors
Error in communication with SNTP server
State of synchronism with SNTP server
Valid with Master IEEE 1588= ON, notifies the presence (Slave or PTP
Master Active) or absence (PTP Master but Passive) of a higher level
master
ABB | SACE Tmax XT
Internal accessories | 4 - Ekip Com EtherNet/IP TM