ABB SACE Tmax XT5 Operation And Maintenance Manual page 182

Power supply Ekip Com Profinet is supplied directly by the Ekip Touch module to which it is connected.
Remote information Certain additional information concerning the version and status of the module is available via the service
180 | © 2019 ABB | 1SDH002039A1002 - ECN000093027 - Rev. A
NOTE: communication between Ekip Touch and the module is interrupted in the absence of
auxiliary power supply
Menu Local bus activation, which is essential for starting the communication between module and Ekip Touch, is
available in the Settings menu (page 33).
The following information will be available in the About-Modules menu if Ekip Touch has detected the module
correctly:
Information
SN and version
MAC address
connector (via Ekip Connect) or by communication via system bus; the information includes: HW and Boot
version, CRC status (correctness of the SW in the module).
Description
Identifier and SW version of the module
Address assigned by ABB, with OUI (Organizationally Unique Identifier) equal to
ac:d3:64, which uniquely identifies the manufacturer of an Ethernet device
ABB | SACE Tmax XT
Internal accessories | 3 - Ekip Com Profinet