Micro I/O - ABB SACE Tmax XT5 Operation And Maintenance Manual

ABB | SACE Tmax XT

10 - Micro I/O

Micro I/O is a signaling accessory which provides the Trip unit with information about the status of the circuit-
breaker (open, closed, tripped).
Micro I/O is configured by default and is available for XT5 circuit-breakers without internal modules installed.
Connections The circuit diagrams and references concerning the terminals are available in document 1SDM000005A1001.
To connect the module to Ekip Touch and to actuator MOE-E if present, please consult document
1SDH002011A1509.
198 | © 2019 ABB | 1SDH002039A1002 - ECN000093027 - Rev. A Internal accessories | 10 - Micro I/O