GE LOGIQ 200 Quality Assurance Manual page 145

GE MEDICAL SYSTEMS
REV 0
2--3 SERVICE MENU
2--3--1 Service Menu Over view
Key Operation
Arrow Up
Arrow Down
Ctrl + X
Ctrl + R
Instead of Arrow keys the Trackball can be used to select item through the Service Menu.
Procedure 1
Follow these steps to enter the Service Menu.
Probes should be installed in the port and Blue Shift key should be off before take these steps.
1. Pressing Shift + Ctrl keys and then press the Shift +s keys, and then Shift + 1 keys.
2. Input the PASSWORD and press Return key.
The Service Top Menu will appear on the monitor as shown in ILLUSTRATION 2--5.
Service Utility MENU :
Current Software Version is 3.0
*System Diagnosis
Board/Program Version
System Reset
Key Operation History
Option Set
Initialize :1
System Clock Adjust
Exit
LOGIQ 200 PRO Series PROPRIETARY MANUAL
To move from menu to menu
To Exit submenu in System Diagnosis
To Exit Service menu or to enter Service Top menu.
Note
Note
Top Menu
(1:America 2:Europe 3:Asia 4:Japan)
SERVICE TEST TOP MENU
ILLUSTRATION 2--5
2--8
99/03/12 09:16:37
2242594
DIAGNOSTICS