GE LOGIQ 200 Quality Assurance Manual page 111

GE MEDICAL SYSTEMS
REV 0
2–3–2 System Diagnosis
Procedure 1
Follow these steps to enter the System Diagnosis menu.
1. Using the Arrow up/down keys, select the "System Diagnosis" menu in the Top Menu. Refer to the
ILLUSTRATION 2–5. The left side of selected menu, here will be appeared the cursor (*).
2. Press Set or Return keys.
The System Diagnosis menu will appear on the monitor as shown in the ILLUSTRATION 2–6.
Service Utility MENU :
Current Software Version is 2.0
NAME
*System test
Beam Former test
HV test
ADC test
DSC Front/end test
B mode Function test
B mode X–Y Memory test
B mode Cine test
M mode Function test
MST test
System DRAM test
Keyboard test
PIOP test
Monitor test
Power Supply test
ROM Version
Exit
Procedure 2
Follow these step to exit System Diagnosis menu.
1. Select Exit on the System Diagnosis menu, and press Set or Return keys.
The System Diagnosis menu will be exited.
OR
2. Press Ctrl + R keys.
The System Diagnosis menu will be exited. If this step performed again, the Top menu will be entered
again.
System Diagnosis
Time Status
21 M
0 M
1 M
O M
1 M
1 M
1 M
8 M
2 M
4 M
1 M
0 M
1 M
0 M
1 M
0 M
SERVICE DIAGNOSIS MENU
ILLUSTRATION 2–6
2–10
a
LOGIQ 200 PROPRIETARY MANUAL
96/03/12 09:16:37
2138854
DIAGNOSTICS