GE LOGIQ 200 Quality Assurance Manual page 177

GE MEDICAL SYSTEMS
REV 0
2--3--2 System Diagnosis (Continued)
TEST NAME: POWER SUPPLY TEST
PURPOSE
To check POWER SUPPLYs which consist of +5V digital, +5V analog, --5V, +12V for monitor, 12V for
ECG, --12V for ECG.
CRITERIA
Refer to result shown on the monitor.
Action if the test fails
Perform the adjustment of failed output Voltage.(Refer to Power supply check procedure). If the out-
put voltage is not adjusted within proper tolerance, The power supply should be replaced.
The following Assemblies are necessary for this test
MVP, MSTE, SCAN, TBF, POWER SUPPLY, Monitor
POWER SUPPLY
+5 V --5V +12V --12V
for for ECG
Analog
MVP TEST
ILLUSTRATION 2--22
LOGIQ 200 PRO Series PROPRIETARY MANUAL
+5V +12V
for for
digital Monitor
2--40
2242594
DIAGNOSTICS