GE LOGIQ 200 Quality Assurance Manual page 123

GE MEDICAL SYSTEMS
REV 2
2–3–2 System Diagnosis (Continued)
TEST NAME: ADC TEST
PURPOSE
To check the A/D converter in DSC front-end circuit.
CRITERIA
Refer to image shown on the monitor.
DISPLAY FORMAT OF RESULTS
Action if the test fails
If RTC operates properly, change DSC board assy.
The following Assemblies are necessary for this test
PROBE, HV, RTC, DSC, MST, CONN, Monitor
LOGIQ
ADC TEST MENU
ILLUSTRATION 2–13
2–22
a
200 PROPRIETARY MANUAL
2138854
DIAGNOSTICS