GE LOGIQ 200 Quality Assurance Manual page 137

GE MEDICAL SYSTEMS
REV 2
2–3–2 System Diagnosis (Continued)
TEST NAME: POWER SUPPLY TEST
PURPOSE
To check POWER SUPPLYs which consist of +5V digital, +5V analog, –5V, +15V, –15V. +12V
CRITERIA
Refer to result shown on the monitor.
Action if the test fails
Perform the adjustment of failed output Voltage.(Refer to Power supply check procedure). If the out-
put voltage is not adjusted within proper tolerance, The power supply should be replaced.
The following Assemblies are necessary for this test
DSC, MST, CONN, POWER SUPPLY, Monitor
POWER SUPPLY
+5 V –5V +15V –15V
for
Analog
DSC TEST
ILLUSTRATION 2–25
2–36
a
LOGIQ 200 PROPRIETARY MANUAL
+5.0V +12V
for digital for
Monitor
2138854
DIAGNOSTICS