GE LOGIQ 200 Quality Assurance Manual page 14

g
GE Medical Systems
Power Supply Readings
Manuals for details on tolerances, checking and adjusting of power supplies.
Power Supplies available
depend on the type of system
serviced.
Check only those that apply.
Mark all other entries N/A.
Reference is 0 voltage for the supply being measured.
Comments: ____________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
Functional Checks Refer to Chapter 4, Section 4-2 of the
General
Foot Switch
Record Key
Freeze Key
Printer Setting
Comments: _____________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
NOTE: Refer to the
Refer to Chapter 4, Section 4-3 of the
Supply
+5v Digital
-5v Digital
+5v Analog
-5 v Analog
+15
-15
+12v
-12v
HV
B-Mode
Focus Oper.
Gain Knob
TGC Pots
Dynamic Range
LOGIQ a200 or LOGIQ 200 PRO
4/16
LOGIQ a200
Actual Reading
LOGIQ a200 or LOGIQ 200 PRO
B/M-Mode
Focus Oper. Focus Oper.
Gain Knob Gain Knob
TGC Pots TGC Pots
Dynamic Range Dynamic Range
User Manual for more information on system operation.
2277615-100
REV 0
or LOGIQ 200 PRO Service
Adjusted To
Service Manual.
M-Mode