GE LOGIQ 200 Quality Assurance Manual page 25

g
GE Medical Systems
This process is more intensive than a LOGIQ 200 PRO. No device is available the save the presets
electronically. Each screen must be displayed on the monitor and a print taken of that display. The prints
can then be stored in a safe place for future reference.
Ask the customer which menus are important for them to archive in the rare case of a catastropic failure.
PRESETS
To go directly to the system setup parameters pages, press <CTRL><S>
Make prints of all System Setup Parameter pages.
Remember: Some pages may require two or more prints due to each applications presets and then for
each probe attached. Use the following items as a check list of what menus were printed:
General System Setup
User OB Table Sub menu
Probe Parameter 1 Setup
Preset 1
Preset 2
Probe Parameter 2 Setup
Preset 1
Preset 2
Image Display and Application Setup
Preset 1
Preset 2
Body Pattern Setup
Preset 1
Preset 2
Comment Setup
Preset 1
Preset 2
Measurement Setup
Preset 1
Preset 2
Patient Entry Setup
Preset 1
Preset 2
LOGIQ α 200
Probe 1
Probe 2
Probe 1
Probe 2
Probe 1
Probe 2
Probe 1
Probe 2
Report Format Sub menu
A/N Assignment Sub menu
Cardiac Calc Sub menu
Report Format Sub menu
A/N Assignment Sub menu
Cardiac Calc Sub menu
2277615-100
15/16
REV 0