GE LOGIQ 200 Quality Assurance Manual page 147

GE MEDICAL SYSTEMS
REV 0
2--3--2 System Diagnosis
Procedure 1
Follow these steps to enter the System Diagnosis menu.
1. Using the Arrow up/down keys, select the "System Diagnosis" menu in the Top Menu. Refer to the
ILLUSTRATION 2--5. The left side of selected menu, here will be appeared the cursor (*).
2. Press Set or Return keys.
The System Diagnosis menu will appear on the monitor as shown in the ILLUSTRATION 2--6.
Service Utility MENU :
Current Software Version is 3.0
NAME
*System test
Scan Test
TBF Test
Linear/Convex Path
Sector Probe Path
BPHV test
MVP Hardware Test
B mode Function
B mode Cine
M mode Function
MSTE test
Keyboard
PIOP
Monitor
Power Supply
Exit
Press 'ctrl'+'X'to
Procedure 2
Follow these step to exit System Diagnosis menu.
1. Select Exit on the System Diagnosis menu, and press Set or Return keys.
The System Diagnosis menu will be exited.
OR
2. Press Ctrl + R keys.
The System Diagnosis menu will be exited. If this step performed again, the Top menu will be entered
again.
LOGIQ 200 PRO Series PROPRIETARY MANUAL
System Diagnosis
Time
21 M
0 M
0 M
0 M
0 M
1 M
1 M
1 M
8 M
2 M
4 M
0 M
1 M
0 M
1 M
SERVICE DIAGNOSIS MENU
ILLUSTRATION 2--6
2--10
99/03/12 09:16:37
Status
2242594
DIAGNOSTICS