Resetting And Clearing The Server; Software Reset; Bmc Reset - NEC Express5800/R120e-1M Instruction Manual

Chapter 1 Maintenance
7.

Resetting and Clearing the Server

See this section if the server does not work or if you want to recover the BIOS settings to the factory settings.
7.1

Software Reset

If the server halts before starting the OS, press <Ctrl> + <Delete> + <Alt> keys. The software reset clears all
the data in progress in memory, and restarts the server.
7.2

BMC Reset

Press BMC RESET Switch only if a problem occurs in EXPRESSSCOPE Engine 3 (BMC).
Do not press BMC RESET Switch in usual operation.
To reset the BMC, press BMC RESET Switch at least five seconds. Remote management feature is disabled
for about 2 minutes after BMC is reset.
46
Note
To reset the server when it does not halt, make sure that no processing is in
progress
Note
Do not shutdown the system, reboot the system, or perform any switch operation
after pressing the BMC Reset switch for approximately 2 minutes.
Tips
BMC RESET Switch cannot reboot the server.
Express5800/R120e-1M, R120e-2M Maintenance Guide
7. Resetting and Clearing the Server