System Components - F734/F735; System Components - F731 - Pitney Bowes F731 Operator's Manual

1 • Introduction
System
Components
- F734/F735
1-6
1
Front Cover
Provides access to the loading area of the machine. The cover is
interlocked to prevent machine operation when opened.
Material Support Plate
2
This is used to support the material and to keep it upright when
loading material. Move the plate to the left, load material, move the
plate against the material then prepare more material for loading.
Pressure Assembly
3
This assembly will only move when the Front Cover is CLOSED. To
load material, move the Pressure Assembly to the left. After loading,
move the Pressure Assembly against the material. When the machine
is in operation, the Pressure Assembly will automatically monitor the
amount of material and ensure that a constant pressure is applied in
order to ensure continuous, uninterrupted material feed.
4
Pressure Assembly Interrupt
Operation of this plate will interrupt the movement/operation of the
Pressure Assembly and can be used by the operator during the
material loading process.
5
Material Exit Area
Provides access to the material exit area for clearing stalled material.
The cover is interlocked to prevent machine operation when open.
The Guide Strips shown are optional and are only used for 'difficult'
material.
6
Control Panel
Operator controls are conveniently grouped on the front of the High
Capacity Loader. Four controls govern all loading and paper handling
functions. See page 1-10 for details.
7
Power Cord
Connect to the F731 power outlet. See the safety information on page
1-2 before connecting the mains cord.
8
Main Power Switch
Applies power to the F734/F735 High Capacity Loader. This switch is
not accessible when the F734/F735 is docked to the F731 Universal
Feeder. When docked, it should be left in the ON position. The F731
power switch will then control power to both modules.
SDC790A