Pitney Bowes F731 Operator's Manual page 42

3 • Programming
3-6
018> Name of new program : --------
<-->=ALPHA
You can enter a program name up to eight characters long, using any
combination of alpha and numeric characters.
Use the Arrow Buttons until the first character of your program name
appears.
Press the Green button to confirm each character.
When the name is complete, press Red to continue. The display shows the
material selection screen:
018> Material: PAPER/DF
<-->=SELECT
Use the Arrow Buttons to select the material for this job:
Paper/DF
Paper
Booklet
Booklet/RM This function is not used in scanning mode.
Paper/DF+
Press Green to confirm your selection. The display shows the material
loading orientation selection:
018> Loading orientation : 3.DOWN-BOTTOM
<-->=SELECT
Green=CONFIRM
Green=CONFIRM
Sheets with double detect turned ON (default setting).
This will be the most common setting for sheets.
Sheets with the double detect turned OFF. This is not
recommended as the feeder will not sense double
feeds. Select this mode for material (sheets) above
160g/m (42 lb).
2
This function is not used in scanning mode.
Sheets with double detect turned on at a custom
setting. This is normally used for sheets with
heavily printed block areas and will be used only on
advice from your service representative.
Green=CONFIRM
Red=GO ON
Blue=EXIT
Blue=EXIT
SDC790A