Important
Safety Notes
(continued)
SDC790A
•
Ensure there is no strain on the power cord and that it does not become
jammed between the equipment, walls or furniture.
•
Be certain the area in front of the wall receptacle into which the machine
is plugged is free from obstruction.
•
Before clearing a stoppage, be sure machine mechanisms come to a
stop.
•
When removing stalled material, avoid using too much force to protect
against minor personal injury and damaging equipment.
•
To prevent overheating, do not cover any vent openings.
•
Operation of this equipment without periodic maintenance will inhibit
optimum operating performance and could cause the equipment
to malfunction. Contact your machine supplier for required service
schedule.
•
Read all instructions before attempting to operate the equipment.
•
Use this equipment only for its intended purpose.
•
Always follow the specific occupational safety and health standards for
your workplace.
Introduction • 1
1-3